Claim · model-written summary
The system required about 3 sec per sensor in worst-case operation.
Not reportedMaterialGeneCompoundOrgan / stageInteractorInteractor roleSecond interactorSecond interactor roleTreatmentComparatorSettingDirectionQualifier
Verbatim
e0“About 3 sec per sensor, i.e., 13 min for the total of 264 sensors (worst case) are needed to collect spectral energy data, store them on hard disk and move the channel multiplexer to the next fibre optic position.”
t0“Beech‐Spruce”
Title
A Novel System for Spectral Analysis of Solar Radiation within a Mixed Beech‐Spruce Stand
H. Reitmayer; H. Werner; P. Fabian Plant Biology 2002. doi:10.1055/s-2002-25731
Other claims from this paper (7)
- Method / resource The canopy radiation instrument measured spectral flux over 380 nm to 850 nm.
- Method / resource The instrument had 0.8 nm spectral resolution.
- Method / resource The instrument integrated in a minimum 16 milliseconds per sensor at noon in clear sky.
- Method / resource The system required 13 min for 264 sensors in worst-case operation.
- Method / resource Quartz fibre sensors had a 0.2 W/m 2 detection limit.
- Method / resource Radiant flux density precision was below 3 %.
- Method / resource Radiant flux density absolute error was below 10 %.