Abstract
An experiment was conducted at Horticulture Garden, Department of Horticulture, Chandra Shekhar Azad University of Agriculture & Technology, Kanpur during the Kharif season of 2016-2017. The experiment was laid out in Randomized Block Design with ten treatments in three replication consist of three levels of each growth regulator i.e. GA3 at 10, 20, 30 ppm, NAA at 20, 30, 40 ppm and 2,4-D at 2.5, 5.0, 7.5 ppm. Maximum plant height (96.18 cm), maximum number of primary and secondary branches, and maximum fruit per plant (46.06), fruit yield per plant (1320.0 g) and fruit yield per hectare (52.5 t/ha) was observed with the application of GA3 at 30 ppm. However, maximum number of flowers was obtained with the application of 2,4-D (5 ppm). The results indicated that the use of GA3 at specific concentration of 30 ppm, considerably increased the weight of fruit and significantly increased total yield up to 52.5 t/h.
Abstract from the paper’s OpenAlex record; open copy licensed cc-by-nc-sa. Read at the source ↗
The text the model read, with the source record’s inline markup (italics, sub- and superscripts) rendered and its character entities decoded; quote offsets refer to the raw text.
Claims 7
Claim · model-written summary
GA3 at 30 ppm gave the maximum plant height in tomato (96.18 cm).
- Taxon
- Tomato
Solanum lycopersicumt0 - Treatment
- GA3 at 30 ppme2
- Outcome
- plant heighte1
- Direction
- Maximume1
- Value
- 96.18 cme1
- Setting
- Kanpure0
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e1“Maximum plant height (96.18 cm)”
e2“application of GA3 at 30 ppm”
e0“Kanpur during the Kharif season of 2016-2017”
t0“Tomato (Solanum lycopersicom Mill.)”
Claim · model-written summary
GA3 at 30 ppm gave the maximum number of primary and secondary branches in tomato.
- Taxon
- TomatoSolanum lycopersicumt0
- Treatment
- GA3 at 30 ppme2
- Outcome
- number of primary and secondary branchese3
- Direction
- maximume3
- Setting
- Kanpure0
Not reportedComparatorValue
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e3“maximum number of primary and secondary branches”
e2“application of GA3 at 30 ppm”
e0“Kanpur during the Kharif season of 2016-2017”
t0“Tomato (Solanum lycopersicom Mill.)”
Claim · model-written summary
GA3 at 30 ppm gave the maximum number of fruit per plant in tomato (46.06).
- Taxon
- TomatoSolanum lycopersicumt0
- Treatment
- GA3 at 30 ppme2
- Outcome
- fruit per plante4
- Direction
- maximume4
- Value
- 46.06e4
- Setting
- Kanpure0
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e4“maximum fruit per plant (46.06)”
e2“application of GA3 at 30 ppm”
e0“Kanpur during the Kharif season of 2016-2017”
t0“Tomato (Solanum lycopersicom Mill.)”
Claim · model-written summary
GA3 at 30 ppm increased fruit yield per plant in tomato (1320.0 g).
- Taxon
- TomatoSolanum lycopersicumt0
- Treatment
- GA3 at 30 ppme2
- Outcome
- fruit yield per plante5
- Direction
- higherinferrede5
- Value
- 1320.0 ge5
- Setting
- Kanpure0
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e5“fruit yield per plant (1320.0 g)”
e2“application of GA3 at 30 ppm”
e0“Kanpur during the Kharif season of 2016-2017”
t0“Tomato (Solanum lycopersicom Mill.)”
Claim · model-written summary
GA3 at 30 ppm significantly increased fruit yield per hectare in tomato (52.5 t/ha).
- Taxon
- TomatoSolanum lycopersicumt0
- Treatment
- GA3 at 30 ppme2
- Outcome
- fruit yield per hectaree6
- Direction
- higherinferrede6
- Value
- 52.5 t/hae6
- Setting
- Kanpure0
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e6“fruit yield per hectare (52.5 t/ha)”
e1“significantly increased total yield up to 52.5 t/h”
e2“application of GA3 at 30 ppm”
e0“Kanpur during the Kharif season of 2016-2017”
t0“Tomato (Solanum lycopersicom Mill.)”
Claim · model-written summary
GA3 at 30 ppm considerably increased tomato fruit weight.
- Taxon
- TomatoSolanum lycopersicumt0
- Treatment
- GA3 at specific concentration of 30 ppme7
- Outcome
- weight of fruite7
- Direction
- increasede7
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e7“GA3 at specific concentration of 30 ppm, considerably increased the weight of fruit”
t0“Tomato (Solanum lycopersicom Mill.)”
Claim · model-written summary
The 2,4-D treatment at 5 ppm gave the maximum number of flowers in tomato.
- Taxon
- TomatoSolanum lycopersicumt0
- Treatment
- 2,4-D (5 ppm)e1
- Outcome
- number of flowerse1
- Direction
- maximume1
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e1“maximum number of flowers was obtained with the application of 2,4-D (5 ppm)”
t0“Tomato (Solanum lycopersicom Mill.)”
The same questions in other papers
2,4-D · yield · Solanum lycopersicum (tomato)Results differ
9 papers in the same direction as this paper · 3 in the opposite direction
- negative
- no effect
- negative
9 papers more in this group
See all 13 papers →Gibberellic acid · yield · Solanum lycopersicum (tomato)Results differ
50 papers in the same direction as this paper · 5 in the opposite direction
- negative
- no effect
- no effect
52 papers more in this group
See all 56 papers →Gibberellic acid · growth · Solanum lycopersicum (tomato)Results differ
79 papers in the same direction as this paper · 7 in the opposite direction
- negative
- no effect
- negative
83 papers more in this group
See all 87 papers →Claims are grouped by organism, treatment and what was measured or targeted. A paper counts as positive when any of its claims in the group is positive.