Paper · 2020 · The Agrarian Scientific Journal

Influence of main processing methods on the water-physical properties of the soil and soybean yield in Western Siberia

Elena Aleksandrovna Krasnova; Valentina Vasilevna Rzaeva; Aleksandr Sergeevich Lynkov

11
claims
22
verbatim quotes
1
citations
1
research areas
✓
Open access · cc-by-nc

Abstract

The results of research on the influence of basic tillage methods on agrophysical indicators in soybean cultivation are presented. Over the years of research (2017-2019), the soil density (0-30 cm) during soybean cultivation according to the studied methods of basic tillage was optimal for plant growth and development and was within the range of 1.00-1.27 g/cm3 before sowing; 1.05-1.19 g/cm3 during the branching phase; 1.10-1.36 g/cm3 before harvesting. The reserves of available moisture before sowing in the twenty-centimeter layer of soil were characterized by satisfactory and good security (30.4-43.0 mm), the meter layer-good and very good security (150.8-172.3 mm) on variants with soil treatment and satisfactory at zero treatment-125.1 mm. In the phase of soybean branching, the available moisture reserves at a depth of 0-20 cm were characterized by satisfactory water availability (31.0-35.6 mm) and good (159.6-160.6 mm) in the meter layer of soil. Before cleaning, the available moisture reserves were characterized by satisfactory security. The highest yield was obtained by a differentiated method of tillage (20-22 cm) with an excess of control (dump method, 20-22 cm) by 0.06 t/ha. A decrease in the depth of processing (12-14cm) led to a decrease in the yield of soybean grain by 0.07-0.11 t/ha for the studied methods of basic soil treatment.

Abstract from the paper’s OpenAlex record; open copy licensed cc-by-nc. Read at the source ↗

The text the model read, with the source record’s inline markup (italics, sub- and superscripts) rendered and its character entities decoded; quote offsets refer to the raw text.

Claims 11

Observationobservedoriginal resultmeasured

Claim · model-written summary

Soil density before sowing ranged from 1.00 to 1.27 g/cm3.

Taxon
soybeanGlycine maxt0
Outcome
soil densitye0
Value
1.00-1.27 g/cm3e0
Qualifier
before sowinge0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“soil density (0-30 cm) during soybean cultivation according to the studied methods of basic tillage was optimal for plant growth and development and was within the range of 1.00-1.27 g/cm3 before sowing”

✓ located verbatim in the source · abstract, characters 175–377 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Soil density during branching ranged from 1.05 to 1.19 g/cm3.

Taxon
soybeanGlycine maxt0
Outcome
soil densitye0
Value
1.05-1.19 g/cm3e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“the soil density (0-30 cm) during soybean cultivation according to the studied methods of basic tillage was optimal for plant growth and development and was within the range of 1.00-1.27 g/cm3 before sowing; 1.05-1.19 g/cm3 during the branching phase”

✓ located verbatim in the source · abstract, characters 171–421 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Soil density before harvest ranged from 1.10 to 1.36 g/cm3.

Taxon
soybeanGlycine maxt0
Outcome
soil densitye0
Value
1.10-1.36 g/cm3e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“the soil density (0-30 cm) during soybean cultivation according to the studied methods of basic tillage was optimal for plant growth and development and was within the range of 1.00-1.27 g/cm3 before sowing; 1.05-1.19 g/cm3 during the branching phase; 1.10-1.36 g/cm3 before harvesting”

✓ located verbatim in the source · abstract, characters 171–456 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Before sowing, available moisture was 30.4-43.0 mm in the 20 cm soil layer.

Taxon
soybeanGlycine maxt0
Outcome
reserves of available moisturee0
Value
30.4-43.0 mme0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“reserves of available moisture before sowing in the twenty-centimeter layer of soil were characterized by satisfactory and good security (30.4-43.0 mm)”

✓ located verbatim in the source · abstract, characters 462–613 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Before sowing, meter-layer soil moisture with treatment was 150.8-172.3 mm.

Taxon
soybeanGlycine maxt0
Outcome
reserves of available moisturee0
Value
150.8-172.3 mme0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“The reserves of available moisture before sowing in the twenty-centimeter layer of soil were characterized by satisfactory and good security (30.4-43.0 mm), the meter layer-good and very good security (150.8-172.3 mm) on variants with soil treatment”

✓ located verbatim in the source · abstract, characters 458–707 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Before sowing, meter-layer moisture at zero treatment was 125.1 mm.

Taxon
soybeanGlycine maxt0
Outcome
reserves of available moisturee0
Value
125.1 mme0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“The reserves of available moisture before sowing in the twenty-centimeter layer of soil were characterized by satisfactory and good security (30.4-43.0 mm), the meter layer-good and very good security (150.8-172.3 mm) on variants with soil treatment and satisfactory at zero treatment-125.1 mm”

✓ located verbatim in the source · abstract, characters 458–751 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

At branching, available moisture at 0-20 cm was 31.0-35.6 mm.

Taxon
soybeanGlycine maxt0
Outcome
available moisture reservese0
Value
31.0-35.6 mme0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“In the phase of soybean branching, the available moisture reserves at a depth of 0-20 cm were characterized by satisfactory water availability (31.0-35.6 mm)”

✓ located verbatim in the source · abstract, characters 753–910 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

At branching, meter-layer available moisture was 159.6-160.6 mm.

Taxon
soybeanGlycine maxt0
Outcome
available moisture reservese0
Value
159.6-160.6 mme0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“In the phase of soybean branching, the available moisture reserves at a depth of 0-20 cm were characterized by satisfactory water availability (31.0-35.6 mm) and good (159.6-160.6 mm) in the meter layer of soil”

✓ located verbatim in the source · abstract, characters 753–963 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Available moisture before cleaning was satisfactory.

Taxon
soybeanGlycine maxt0
Outcome
available moisture reservese0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“Before cleaning, the available moisture reserves were characterized by satisfactory security”

✓ located verbatim in the source · abstract, characters 965–1057 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

Differentiated tillage at 20-22 cm yielded 0.06 t/ha more than dump tillage.

Taxon
soybeanGlycine maxt0
Treatment
differentiated method of tillage (20-22 cm)e0
Outcome
yielde0
Direction
higheste0
Value
0.06 t/hae0
Comparator
dump method, 20-22 cme0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“The highest yield was obtained by a differentiated method of tillage (20-22 cm) with an excess of control (dump method, 20-22 cm) by 0.06 t/ha”

✓ located verbatim in the source · abstract, characters 1059–1201 · show in text ↑
Intervention effectobservedoriginal resultnegativemeasured

Claim · model-written summary

Shallower tillage reduced soybean grain yield by 0.07-0.11 t/ha.

Taxon
soybeanGlycine maxt0
Treatment
depth of processing (12-14cm)e0
Outcome
yield of soybean graine0
Direction
decreasee0
Value
0.07-0.11 t/hae0

Not reportedComparator

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

t0

“soybean”

✓ located verbatim in the source · title, characters 86–93 · show in text ↑
e0

“A decrease in the depth of processing (12-14cm) led to a decrease in the yield of soybean grain by 0.07-0.11 t/ha”

✓ located verbatim in the source · abstract, characters 1203–1316 · show in text ↑

tillage · yield · Glycine max (soybean)Positive and negative results

390 papers: 264 positive, 126 negative or no effect

263 papers in the same direction as this paper · 100 in the opposite direction · 26 reporting no difference from an alternative

  1. no effect
  2. no effect
  3. no effect

386 papers more in this group

See all 390 papers →

Claims are grouped by organism, treatment and what was measured or targeted. A paper counts as positive when any of its claims in the group is positive.