Claim · model-written summary
Leaf rust control ranged from 71.3% to 99.5% at 480 minutes.
CoffeaNot reportedMaterialGeneCompoundOrgan / stageInteractorInteractor roleSecond interactorSecond interactor roleTreatmentComparatorSettingDirection
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
t0“Coffee Leaves”
e0“The percentage of control ranged from 94.6% to 100% and from 71.3% to 99.5% at 180 min and 480 min of drying time, respectively.”
Title
Eduardo Granados; Laércio Zambolim Journal of Agricultural Science 2019. doi:10.5539/jas.v11n6p329
Other claims from this paper (19)
- Observation About 85% of treatments retained over 30% copper after 120 minutes.
- Observation About 45% of treatments retained over 30% copper after 480 minutes.
- Observation Copper oxychloride with 0.75% mineral oil retained over 30% copper after 480 minutes.
- Observation Copper oxychloride with 0.05% adjuvant retained at least 40% copper after 480 minutes.
- Observation Copper oxychloride with 0.1% adjuvant retained at least 40% copper after 480 minutes.
- Observation Copper oxychloride with 0.5% mineral oil and 0.05% to 0.20% adjuvant retained over 30% copper.
- Observation Copper oxychloride with 0.75% mineral oil and 0.05% adjuvant retained over 30% copper.
- Observation Copper oxychloride with 0.75% mineral oil and 0.10% adjuvant retained over 30% copper.
- Intervention effect All treatments controlled coffee leaf rust differently from the control, without differences among treatments.
- Observation Leaf rust control ranged from 94.6% to 100% at 180 minutes.
- Observation Copper retention among the best treatments ranged from 32.2% to 55.2% at 180 minutes.
- Observation Copper retention among the best treatments ranged from 23.7% to 51.5% at 480 minutes.
- Observation Copper oxychloride plus 0.75% mineral oil gave the highest copper retention at 180 and 480 minutes.
- Association The best rust control did not always correspond to highest copper retention.
- Observation Copper oxychloride with 0.75% mineral oil achieved over 97% rust control.
- Intervention effect Adding adjuvant did not necessarily improve copper oxychloride tenacity or rust control.
- Observation Pyraclostrobin plus epoxiconazol alone controlled 100% of rust at all three drying times.
- Observation Pyraclostrobin plus epoxiconazol mixed with copper hydroxide controlled 100% of rust at all three drying times.
- Observation Adding micronutrients to the fungicide mixture gave 100% control at 120 and 480 minutes.