Claim · model-written summary
All treatments controlled coffee leaf rust differently from the control, without differences among treatments.
CoffeaNot reportedMaterialGeneCompoundOrgan / stageInteractorInteractor roleSecond interactorSecond interactor roleSettingDirectionValueQualifier
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
t0“Coffee Leaves”
e0“All the treatments differed from the control but did not differ between each other for the coffee leaf rust control.”
Title
Eduardo Granados; Laércio Zambolim Journal of Agricultural Science 2019. doi:10.5539/jas.v11n6p329
Other claims from this paper (19)
- Observation About 85% of treatments retained over 30% copper after 120 minutes.
- Observation About 45% of treatments retained over 30% copper after 480 minutes.
- Observation Copper oxychloride with 0.75% mineral oil retained over 30% copper after 480 minutes.
- Observation Copper oxychloride with 0.05% adjuvant retained at least 40% copper after 480 minutes.
- Observation Copper oxychloride with 0.1% adjuvant retained at least 40% copper after 480 minutes.
- Observation Copper oxychloride with 0.5% mineral oil and 0.05% to 0.20% adjuvant retained over 30% copper.
- Observation Copper oxychloride with 0.75% mineral oil and 0.05% adjuvant retained over 30% copper.
- Observation Copper oxychloride with 0.75% mineral oil and 0.10% adjuvant retained over 30% copper.
- Observation Leaf rust control ranged from 94.6% to 100% at 180 minutes.
- Observation Leaf rust control ranged from 71.3% to 99.5% at 480 minutes.
- Observation Copper retention among the best treatments ranged from 32.2% to 55.2% at 180 minutes.
- Observation Copper retention among the best treatments ranged from 23.7% to 51.5% at 480 minutes.
- Observation Copper oxychloride plus 0.75% mineral oil gave the highest copper retention at 180 and 480 minutes.
- Association The best rust control did not always correspond to highest copper retention.
- Observation Copper oxychloride with 0.75% mineral oil achieved over 97% rust control.
- Intervention effect Adding adjuvant did not necessarily improve copper oxychloride tenacity or rust control.
- Observation Pyraclostrobin plus epoxiconazol alone controlled 100% of rust at all three drying times.
- Observation Pyraclostrobin plus epoxiconazol mixed with copper hydroxide controlled 100% of rust at all three drying times.
- Observation Adding micronutrients to the fungicide mixture gave 100% control at 120 and 480 minutes.