Abstract
Experiments (spraying and dipping) were carried out to study the effect of different plant growth regulators with two methods of application on gladiolus cv. Pusa Jyotsna for various parameters of corm production. Spraying TIBA at 500 ppm produced maximum number of corms. Maximum number of cormels was produced by dipping corms in kinetin at 500 ppm concentration. Corm weight was maximum by dipping with 200 ppm of GA3. Spraying GA3 at 500 ppm resulted in maximum weight of cormels per plant and maximum diameter of corms. Dipping in 500 ppm of GA3 produced maximum volume of corms. Propagation co-efficient was maximum in BA at 100 ppm as spray treatment, whereas it was minimum in the case of TIBA at 1500 ppm. This may be due to growth retardation.
Abstract from the paper’s OpenAlex record; open copy licensed cc-by-nc-sa. Read at the source ↗
The text the model read, with the source record’s inline markup (italics, sub- and superscripts) rendered and its character entities decoded; quote offsets refer to the raw text.
Claims 9
Claim · model-written summary
Spraying TIBA at 500 ppm gave the maximum number of corms.
GladiolusNot reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e1“Spraying TIBA at 500 ppm produced maximum number of corms”
t0“Corm Production in Gladiolus”
Claim · model-written summary
Dipping corms in kinetin at 500 ppm gave the maximum number of cormels.
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e2“Maximum number of cormels was produced by dipping corms in kinetin at 500 ppm concentration”
t0“Corm Production in Gladiolus”
Claim · model-written summary
Dipping with 200 ppm GA3 gave the maximum corm weight.
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e3“Corm weight was maximum by dipping with 200 ppm of GA3”
t0“Corm Production in Gladiolus”
Claim · model-written summary
Spraying GA3 at 500 ppm gave the maximum weight of cormels per plant.
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e4“Spraying GA3 at 500 ppm resulted in maximum weight of cormels per plant and maximum diameter of corms”
t0“Corm Production in Gladiolus”
Claim · model-written summary
Spraying GA3 at 500 ppm gave the maximum corm diameter.
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e4“Spraying GA3 at 500 ppm resulted in maximum weight of cormels per plant and maximum diameter of corms”
t0“Corm Production in Gladiolus”
Claim · model-written summary
Dipping in 500 ppm GA3 gave the maximum corm volume.
Not reportedComparator
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e5“Dipping in 500 ppm of GA3 produced maximum volume of corms”
t0“Corm Production in Gladiolus”
Claim · model-written summary
Propagation coefficient was maximum with BA at 100 ppm as a spray compared with TIBA at 1500 ppm.
- Treatment
- BA at 100 ppm as spray treatmente6
- Outcome
- Propagation co-efficiente6
- Direction
- maximume6
- Comparator
- TIBA at 1500 ppme6
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e6“Propagation co-efficient was maximum in BA at 100 ppm as spray treatment, whereas it was minimum in the case of TIBA at 1500 ppm. This may be due to growth retardation”
t0“Corm Production in Gladiolus”
Claim · model-written summary
Propagation coefficient was minimum with TIBA at 1500 ppm compared with BA at 100 ppm as a spray.
- Treatment
- TIBA at 1500 ppme6
- Outcome
- Propagation co-efficiente6
- Direction
- minimume6
- Comparator
- BA at 100 ppm as spray treatmente6
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e6“Propagation co-efficient was maximum in BA at 100 ppm as spray treatment, whereas it was minimum in the case of TIBA at 1500 ppm. This may be due to growth retardation”
t0“Corm Production in Gladiolus”
Claim · model-written summary
The low propagation coefficient with TIBA at 1500 ppm may be due to growth retardation.
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e6“Propagation co-efficient was maximum in BA at 100 ppm as spray treatment, whereas it was minimum in the case of TIBA at 1500 ppm. This may be due to growth retardation”
t0“Corm Production in Gladiolus”
The same questions in other papers
Gibberellic acid · growth · GladiolusPositive and negative results
37 papers in the same direction as this paper · 1 in the opposite direction
- positive
- positive
- positive
35 papers more in this group
See all 39 papers →application · growth · GladiolusPositive and negative results
20 papers in the same direction as this paper · 2 in the opposite direction
- no effect
- negative
- positive
19 papers more in this group
See all 23 papers →Claims are grouped by organism, treatment and what was measured or targeted. A paper counts as positive when any of its claims in the group is positive.