Paper · 2017 · INTERNATIONAL JOURNAL PLANT SCIENCES

Effect of seed priming on yield and yield components of soybean

KUNAL V. JADHAV; N.V. KAYANDE; M.R. WANDHARE; et al.

10
claims
31
verbatim quotes
6
citations
1
research areas
✓
Open access

Abstract

The results exhibited that seeds primed with CaCl 2 @ 1% (T 3 ) and GA 3 @ 500ppm (T 4 ) recorded significantly higher germination percentage i.e. 84.67 per cent and 83.33 per cent, respectively over the untreated control T 1 (76.00%). Treatment T 3 recorded higher number of initial plant stand (117 plants), followed by treatment T 4 (111 plants) and treatment T 5 (111 plants). This may likely contributed for boosting up economic yield in soybean cultivar, JS-335. The seed priming significantly influenced the seed yield and yield contributing characters of soybean. Highest value for seed yield per hectare was recorded by treatment T 3 CaCl 2 @ 1% (20.12 qt/ha) followed by treatment T 4 -GA 3 @ 50 ppm (19.02 qt/ha), T 5 -KNO 3 @1% (18.35 qt/ ha). All other treatments recorded higher yield than untreated control (14.05 qt/ha) showing to the corresponding favourable improvement in number of pods per plant, number of seeds per pod, test weight (g), seed yield per plot (g), seed yield per Ha (q).

Abstract from the paper’s OpenAlex record, shown for indexing and research. Copyright remains with the authors or the publisher. Read at the source ↗

The text the model read, with the source record’s inline markup (italics, sub- and superscripts) rendered and its character entities decoded; quote offsets refer to the raw text.

Claims 10

Intervention effectobservedoriginal resultpositivesignificant (as stated)measured

Claim · model-written summary

CaCl 2 at 1% raised germination to 84.67 per cent versus 76.00% control.

Taxon
soybeanGlycine maxt0
Treatment
CaCl 2 @ 1%e0
Outcome
germination percentagee0
Direction
highere0
Value
84.67 per cente0
Comparator
untreated control T 1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“seeds primed with CaCl 2 @ 1% (T 3 ) and GA 3 @ 500ppm (T 4 ) recorded significantly higher germination percentage i.e. 84.67 per cent and 83.33 per cent, respectively over the untreated control T 1 (76.00%)”

✓ located verbatim in the source · abstract, characters 27–234 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Intervention effectobservedoriginal resultpositivesignificant (as stated)measured

Claim · model-written summary

GA 3 at 500ppm raised germination to 83.33 per cent versus 76.00% control.

Taxon
soybeanGlycine maxt0
Treatment
GA 3 @ 500ppme0
Outcome
germination percentagee0
Direction
highere0
Value
83.33 per cente0
Comparator
untreated control T 1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“seeds primed with CaCl 2 @ 1% (T 3 ) and GA 3 @ 500ppm (T 4 ) recorded significantly higher germination percentage i.e. 84.67 per cent and 83.33 per cent, respectively over the untreated control T 1 (76.00%)”

✓ located verbatim in the source · abstract, characters 27–234 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Observationobservedoriginal resultpositivemeasured

Claim · model-written summary

T 3 gave the highest initial stand, 117 plants.

Taxon
soybeanGlycine maxt0
Treatment
T 3e0
Outcome
number of initial plant stande0
Direction
highere0
Value
117 plantse0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“Treatment T 3 recorded higher number of initial plant stand (117 plants)”

✓ located verbatim in the source · abstract, characters 236–308 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

T 4 gave an initial stand of 111 plants.

Taxon
soybeanGlycine maxt0
Treatment
T 4e0
Outcome
initial plant stande1
Value
111 plantse0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“followed by treatment T 4 (111 plants)”

✓ located verbatim in the source · abstract, characters 310–348 · show in text ↑
e1

“number of initial plant stand”

✓ located verbatim in the source · abstract, characters 266–295 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

T 5 gave an initial stand of 111 plants.

Taxon
soybeanGlycine maxt0
Treatment
T 5e0
Outcome
initial plant stande1
Value
111 plantse0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“and treatment T 5 (111 plants)”

✓ located verbatim in the source · abstract, characters 349–379 · show in text ↑
e1

“number of initial plant stand”

✓ located verbatim in the source · abstract, characters 266–295 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

CaCl 2 at 1% produced the highest seed yield, 20.12 qt/ha.

Taxon
soybeanGlycine maxt0
Treatment
CaCl 2 @ 1%e0
Outcome
seed yield per hectaree0
Direction
Higheste0
Value
20.12 qt/hae0
Comparator
untreated controle1

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“Highest value for seed yield per hectare was recorded by treatment T 3 CaCl 2 @ 1% (20.12 qt/ha)”

✓ located verbatim in the source · abstract, characters 572–668 · show in text ↑
e1

“untreated control (14.05 qt/ha)”

✓ located verbatim in the source · abstract, characters 804–835 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

GA 3 at 50 ppm produced 19.02 qt/ha seed yield.

Taxon
soybeanGlycine maxt0
Treatment
GA 3 @ 50 ppme0
Outcome
seed yield per hectaree2
Direction
highere3
Value
19.02 qt/hae0
Comparator
untreated controle1

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“treatment T 4 -GA 3 @ 50 ppm (19.02 qt/ha)”

✓ located verbatim in the source · abstract, characters 681–723 · show in text ↑
e1

“untreated control (14.05 qt/ha)”

✓ located verbatim in the source · abstract, characters 804–835 · show in text ↑
e2

“seed yield per hectare”

✓ located verbatim in the source · abstract, characters 590–612 · show in text ↑
e3

“All other treatments recorded higher yield than untreated control”

✓ located verbatim in the source · abstract, characters 756–821 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

KNO 3 at 1% produced 18.35 qt/ha seed yield.

Taxon
soybeanGlycine maxt0
Treatment
KNO 3 @1%e0
Outcome
seed yield per hectaree2
Direction
highere3
Value
18.35 qt/ hae0
Comparator
untreated controle1

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“T 5 -KNO 3 @1% (18.35 qt/ ha)”

✓ located verbatim in the source · abstract, characters 725–754 · show in text ↑
e1

“untreated control (14.05 qt/ha)”

✓ located verbatim in the source · abstract, characters 804–835 · show in text ↑
e2

“seed yield per hectare”

✓ located verbatim in the source · abstract, characters 590–612 · show in text ↑
e3

“All other treatments recorded higher yield than untreated control”

✓ located verbatim in the source · abstract, characters 756–821 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

Other seed priming treatments also produced higher yield than untreated control.

Taxon
soybeanGlycine maxt0
Treatment
All other treatmentse0
Outcome
yielde0
Direction
highere0
Qualifier
14.05 qt/hae0
Comparator
untreated controle0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“All other treatments recorded higher yield than untreated control (14.05 qt/ha)”

✓ located verbatim in the source · abstract, characters 756–835 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

Priming favorably improved pods per plant, seeds per pod and test weight.

Taxon
soybeanGlycine maxt0
Treatment
seed priminge1
Outcome
number of pods per plant, number of seeds per pod, test weight (g)e0
Direction
improvemente0
Comparator
untreated controle2

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“favourable improvement in number of pods per plant, number of seeds per pod, test weight (g)”

✓ located verbatim in the source · abstract, characters 865–957 · show in text ↑
e1

“The seed priming significantly influenced”

✓ located verbatim in the source · abstract, characters 469–510 · show in text ↑
e2

“untreated control (14.05 qt/ha)”

✓ located verbatim in the source · abstract, characters 804–835 · show in text ↑
t0

“soybean”

✓ located verbatim in the source · title, characters 56–63 · show in text ↑

Gibberellic acid · growth · Glycine max (soybean)Results differ

35 papers: 30 positive, 5 negative or no effect

29 papers in the same direction as this paper · 5 in the opposite direction

  1. no effect
  2. no effect
  3. no effect

31 papers more in this group

See all 35 papers →

calcium dichloride · growth · Glycine max (soybean)Positive and negative results

2 papers: 1 positive, 1 negative or no effect

1 in the opposite direction

  1. no effect
See all 2 papers →

Gibberellic acid · yield · Glycine max (soybean)Results agree

17 papers: 17 positive, 0 negative or no effect

16 papers in the same direction as this paper

  1. positive
  2. positive
  3. positive

13 papers more in this group

See all 17 papers →

seed treatment · quality: grain · Glycine max (soybean)Results agree

11 papers: 11 positive, 0 negative or no effect

10 papers in the same direction as this paper

  1. positive
  2. positive
  3. positive

7 papers more in this group

See all 11 papers →

Claims are grouped by organism, treatment and what was measured or targeted. A paper counts as positive when any of its claims in the group is positive.